Bruckner Stenter, 2.40 mt working width, 2.60 mt roller width, 2004 model, 8 chamber, vertical chain, pin, at the entrance; fabric opener, padder, Mahlo weft straightener, long entry, at the exit; plaiter, burners located on both side of the machine (16 burners), gas heated, installed and running situation.

Bruckner Powerframe Stenter Machine, 1.80 mt working width, 2 mt roller width, 2016 model, 8 chambers, horizontal chain, pin and clip, at the entrance; padder, Pleva weft straightener, Erhart Leimer edge control, humidification unit, at the exit; 1 pcs cooling cylinder, plaiter and batcher, Siemens PLC, Lenze inverter, 16 burners (located on both side of the chambers), gas heated, installed and running situation.

Bruckner Brand Stenter, 3.20 mt working width, 3.40 mt machine width, 1990 model, 4 kamara, horizontal chain, pin, 2 chamber Goller pre-washing tank, 2 pcs padder, 1991 model Bruckner brand pre-dryer on the platform, at the entrance; fabric opener, Kusters padder (suitable for dyeing), 2 pcs weft straightener(upper one is 1993 Mahlo weft straightener, used for woven fabric, lower one used for knitted fabric mostly) plaiter at the exit, electric panel reconditioned, LS, Teco inverter, 8 pcs Junkers (German) burners (located both right and left side of chambers), GAS, HEATED, installed and running situation.

Bruckner Brand Stenter, 3.40 mt working width, 3.60 mt machine width, 1998 model (COMPLETE RECONDITIONED IN 2022), 6 chamber, horizontal chain, pin and clip, at the entrance fabric opener, padder (suitable for dyeing), Mahlo weft straightener, at the exit; cooling cylinder, plaiter, ELECTRIC PANEL COMPLETELY REPLACED WITH NEW ONE IN 2022, HEAT CONTROL SYSTEM, AUTOMATIZATION SYSTEM, Delta PLC, Delta inverter, OIL HEATED, installed and running situation.

Bruckner Stenter, 2.60 mt working width, 2.80 mt cylinder width, 2007 model, 7 chambers, vertical chain, needle-cloth holder (knit latch), at the entrance; fabric opener, DOUBLE BRUCKNER SCARF, Mahlo RVMC-12 Weft Editing, Effe starching, at the exit; dock wrapping, shaking, Siemens PLC, Lenze inverter, 14 MAXON Burners from both sides, natural gas, installed and running situation.

Bruckner Brand Stenter, 1.80 mt working width, 2mt roller width, 1999 model, 12 chamber, horizontal chain, CLIP, at the entrance; J-Box, Kusters dye padder with S-Roll feature (222.58.1800), 2 pcs chemical tank, Mahlo weft straightener (over the platform), brushing machine (over the platform), at the exit; 2 cooling unit, J-Box, inspection table, 2 batchers, electric panel with Siemens inverters, PLC, totally 24 Eclipse Brand Original Bruckner Burners located on both sides, gas heated, Stopped at the mill floor.