Showing all 8 results

Krantz Synchro Drying Machine

Number: 1
Model: 2000
Kodu: Mr-03455

Krantz Synchro Drying Machine, 2.40 mt working width, 2.60 mt roll width, 2000 model, 4 chamber, single padder, double entry, single pass, plaiter at the exit, Maxon burner, gas heated, automatisation software is renewed installed and running situation.

Krantz Beam Dyeing Machine

Number: 2
Model: 2003
Kodu: Mr-04486

2 pcs Krantz Beam Dyeing Machine, 340 cm width, 55 cm diameter, 100 kg capacity, 2002-2003 model, Barco Sedomat 5000 programmer, installed and running situation.

Krantz Branded Stenter Machine

Number: 1
Model: 1999
Kodu: Mr-03646
Krantz Brand Multi Pass Stenter, 1.80 mt working width, 1999 model, 60 mt fabric capacity, ideal for stretch fabric, fabric entry and exit in the same direction, 12 burners (2x6 pcs) padder, Mahlo weft straightener, pin, it can run with single operator, gas heated, reconditioned in 2012, installed and running situation.

Krantz Branded Stenter Machine

Number: 1
Model: 1995
Kodu: Mr-03002
Krantz Brand Multi Pass Stenter, 1.80 working width, 2 mt machine width, 1995 model, 6 pass, 58 mt fabric capacity, ideal for denim/thick fabric, vertical chain, pin, telescobic width opening shaft, dock rolling, plaiter, gas heated, PLC, invertor, electric panel full reconditioned, installed and running situation.

 

Krantz Branded Stenter Machine

Number: 1
Model: 1999
Kodu: Mr-03003
Krantz Brand Multi Pass Stenter, 1.80 working width, 2 mt machine width, 1999 model, 6 pass, 58 mt fabric capacity, ideal for denim/thick fabric, vertical chain, pin, telescobic width opening shaft, dock rolling, plaiter, gas heated, PLC, invertor, electric panel full reconditioned, installed and running situation.

 

Krantz Branded Stenter Machine

Number: 1
Model: 1996
Kodu: Mr-02911
Krantz Brand Multi Pass Stenter, 2.40 mt working width, 2.60 mt machine width, 1996 model, ideal for thick woven fabric, 6 burner, 6 pass, vertical entrance with chain, clips, padder at the entrance, dock rolling and plaiter at the exit, gas heated, full reconditioned in 2017, chain replaced with new one, PLC, invertor, dismantled situation.

Krantz Brand Stenter Machine

Number: 1
Model: 2003
Kodu: Mr-04122

Krantz Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2003 model, 6 chambers, vertical chain, needle, inlet; fabric opener, foulard, Setex Weft trimmer, dampening unit, at the exit; edge cutting, shaking, Delta inverter, Delta PLC, Maxon burner, natural gas, installed and running situation.

Krantz Brand Stenter Machine

Number: 1
Model: 2003
Kodu: Mr-04368

Krantz Brand Stenter Machine, 3.40 mt working width, 3.60 mt roller width, 2003 model, 8 chambers, horizontal chain, pin, Erhart Leimer fabric opener (2013 model), padder (padder rolls are rerubberised in 2023), Mahlo weft straightener both at the entrance and at the exit (2013 model), chain is replaced with brand new one at the end of 2018, video system at the entry and at the exit, humidity control device, ELECTRIC PANEL COMPLETELY RENEWED WITH BRAND NEW IN 2021, Siemens PLC, Siemens inverter, fan motors are controlled by inverter, plaiter and batcher at the exit, Maxon burners, gas heated, installed and running situation.