Stenter Machines

Bruckner Stenter, 2.40 mt working width, 2.60 mt roller width, 2004 model, 8 chamber, vertical chain, pin, at the entrance; fabric opener, padder, Mahlo weft straightener, long entry, at the exit; plaiter, burners located on both side of the machine (16 burners), gas heated, installed and running situation.

Monforts Stenter Machine, 1.80 mt working width, 2 mt roller width, 1996 model, 8 chambers, horizontal chain, pin and clip, at the entrance; fabric opener, Erhart Leimer middle guider, J-box, Kusters padder (single S- Vals), at the exit; 2 pcs cooling cylinder, 2 PCS BATCHER, loop system to shift to second batcher, plaiter, ELECTRONICALLY RECONDITIONED, Danfoss- GMT inverter, OIL HEATED, installed and running situation.

Monforts Stenter Machine, 1.80 mt working width, 2 mt roller width, 1993 model, 6 chambers, horizontal chain, pin, at the entrance; fabric opener, Erhart Leimer middle guider, J-box, Kusters padder (single S- Vals), 2012 model Fly-Over weft straightener, at the exit; 2 pcs cooling cylinder, 2 PCS BATCHER, loop system to shift to second batcher, plaiter, Delta PLC, Danfoss- VLT- Allen Bradley Powerflex inverter, COMPLETELY ELECTRONICALLY RECONDITIONED, full automatisation is installed, touch screen, OIL HEATED, installed and running situation.

Artos Brand Stenter, 2.40mt working width, 6 chambers, GAS AND ELECTRIC HEATED, horizontal chain, pin, fabric opener, padder, single head rotary printing, coating, installed and running situation.

2 pcs Alkan Brand Stenter, 2.40 mt working width, 2008 model, 10 chambers, horizontal chain, pin, plaiter, oil heated, installed and running situation

Mikwang Megatex III Stenter Machine, 1.80 mt working width, 2013 model, 8 chamber, horizontal chain, pin, at the entrance; middle guider, padder with three rolls, Mahlo RVMC-12 weft straightener (1.80 mt roll width, 2014 model), at the exit; 2 pcs cooling roll, batcher, plaiter, LS PLC, Mitsubishi Siemens inverter, Pilot Kato burners (4 pcs located on the left, 4 pcs located on the right side of the stenter), gas heated, installed and running situation.

Elteksmak Brand Stenter, 2.20 mt working width, 2.40 mt roll width, 2013 model, 3 chambers, horizontal chain, at the entry; Elteksmak weft straightener, at the exit; plaiter, Siemens PLC, Fuji inverter, STEAM and GAS HEATED, installed and running situation.

TTM RAM-X Stenter, 2.40 mt working width, 2.60 mt roller width, 2007 model, 8 chamber, horizontal chain, pin, at the entrance; Fabric opener, Erhardt Leimer middle guider and feeder, Padder, Mahlo Weft Straightener, long entry, at the exit; batcher, plaiter, Siemens PLC, Siemens inverter, Maxon burners, gas heated, installed and running situation.

Bruckner Powerframe Stenter Machine, 1.80 mt working width, 2 mt roller width, 2016 model, 8 chambers, horizontal chain, pin and clip, at the entrance; padder, Pleva weft straightener, Erhart Leimer edge control, humidification unit, at the exit; 1 pcs cooling cylinder, plaiter and batcher, Siemens PLC, Lenze inverter, 16 burners (located on both side of the chambers), gas heated, installed and running situation.

Babcock Brand Stenter, 1.80 mt working width, 2.00 mt roll width, 1995 model, 7 chambers, horizontal chain, pin & clip at the entrance; fabric opener, J- Box, Kusters padder, at the exit; plaiter and batcher, gas heated, installed and running situation (Mahlo weft straightener, 1 chamber washing cabin, will NOT BE DELIVERED with the machine).

Babcock Brand Stenter, 2.20 mt mt working width, 2.30 mt roll width, 1997 model, 8 chambers, horizontal chain, pin at the entrance; fabric opener, padder, Bianco weft straightener, at the exit; plaiter and batcher, Siemens PLC, inverter, gas heated, installed and running situation.

Krantz Brand Stenter Machine, 3.40 mt working width, 3.60 mt roller width, 2003 model, 8 chambers, horizontal chain, pin, Erhart Leimer fabric opener (2013 model), padder (padder rolls are rerubberised in 2023), Mahlo weft straightener both at the entrance and at the exit (2013 model), chain is replaced with brand new one at the end of 2018, video system at the entry and at the exit, humidity control device, ELECTRIC PANEL COMPLETELY RENEWED WITH BRAND NEW IN 2021, Siemens PLC, Siemens inverter, fan motors are controlled by inverter, plaiter and batcher at the exit, Maxon burners, gas heated, installed and running situation.

Bruckner Brand Stenter, 3.20 mt working width, 3.40 mt machine width, 1990 model, 4 kamara, horizontal chain, pin, 2 chamber Goller pre-washing tank, 2 pcs padder, 1991 model Bruckner brand pre-dryer on the platform, at the entrance; fabric opener, Kusters padder (suitable for dyeing), 2 pcs weft straightener(upper one is 1993 Mahlo weft straightener, used for woven fabric, lower one used for knitted fabric mostly) plaiter at the exit, electric panel reconditioned, LS, Teco inverter, 8 pcs Junkers (German) burners (located both right and left side of chambers), GAS, HEATED, installed and running situation.

Bruckner Brand Stenter, 3.40 mt working width, 3.60 mt machine width, 1998 model (COMPLETE RECONDITIONED IN 2022), 6 chamber, horizontal chain, pin and clip, at the entrance fabric opener, padder (suitable for dyeing), Mahlo weft straightener, at the exit; cooling cylinder, plaiter, ELECTRIC PANEL COMPLETELY REPLACED WITH NEW ONE IN 2022, HEAT CONTROL SYSTEM, AUTOMATIZATION SYSTEM, Delta PLC, Delta inverter, OIL HEATED, installed and running situation.

Dilmenler Brand Stenter, 3.40 mt working width, 3.60 mt roller width, 2016 model, 10 chamber, horizontal chain, pin, at the entrance; fabric opener, J- Box, Padder, Erhardt Leimer weft straightener, at the exit; plaiter, gas heated, installed and running situation.

Dilmenler Brand Stenter, 1.80 mt working width, 2 mt roller width, 2015 model, 10 chamber, horizontal chain, pin, at the entrance; fabric opener, middle guider, padder (suitable for dyeing), J- Box, middle guider, Mahlo RVMC-12 weft straightener, at the exit; plaiter, Setex 848 PLC, Lenze inverter, Weishaupt (Alman) burner, gas heated, installed and running situation.

TTM RAM-X Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2011 model, 7 chambers, horizontal chain, needle, inlet; J-box, fabric opener, DOUBLE SCARF, Mahlo RVMC-12 Weft editing, edge starching, at exit; dock wrapping, shaking, Schneider PLC, Schneider inverter, Pleva, Maxon burner, natural gas, installed and running situation.

Bruckner Stenter, 2.60 mt working width, 2.80 mt cylinder width, 2007 model, 7 chambers, vertical chain, needle-cloth holder (knit latch), at the entrance; fabric opener, DOUBLE BRUCKNER SCARF, Mahlo RVMC-12 Weft Editing, Effe starching, at the exit; dock wrapping, shaking, Siemens PLC, Lenze inverter, 14 MAXON Burners from both sides, natural gas, installed and running situation.

Babcock Brand Stenter, 2 mt working width, 2.20 mt cylinder width, 1993 model, 8 chambers, horizontal chain, needle, fabric opener at the entrance, foulard, Mahlo weft trimmer, at the exit; doka wrapping shaker, banana cylinder, electronically revised in 2018, PLC, inverter, Utku burner (Gümüş Enerji), natural gas, installed and in working condition.

Has Group Brand Stenter Machine, 2.40 mt working width, 2.60 mt cylinder width, 2017 model, 8 chambers, horizontal chain, needle, at the entrance; fabric opener, scarf, Erhardt Leimer weft trimmer, at the exit; shaking, PLC, Schneider inverter, natural gas, installed and running situation.

Krantz Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2003 model, 6 chambers, vertical chain, needle, inlet; fabric opener, foulard, Setex Weft trimmer, dampening unit, at the exit; edge cutting, shaking, Delta inverter, Delta PLC, Maxon burner, natural gas, installed and running situation.

Sun Super (ILSUNG) Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2005 model, 8 chambers, horizontal chain, needle, inlet; fabric opener, DOUBLE SCARF, Fine FWS-16R Weft trimmer, at exit; 2 cooling cylinders, dock wrapping, shaking, Siemens-LS inverter, PLC, 16 burners (double sided), BURNERS REPLACED WITH ZERO BURNER IN 2022, natural gas, installed and running (preheating system at the inlet and edge trimming unit at the outlet will not be supplied) ).

Babcock Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 1997 model, 8 chambers, horizontal chain, needle, inlet; fabric opener, scarf, Mahlo Weft trimming, shaking, natural gas, installed and running situation.

Monforts Montex Matex 5000 Stenter, 2.40 mt working width, 2.60 mt roller width, 1998 model, 7 chamber, horizontal chain, PIN and CLIP, at the entrance; fabric opener, padder, Mahlo Weft Straightener, at the exit; edge trimming unit, batcher, plaiter, inverters, Maxon burners (4 burners are located at the left and 3 burners are located at the right side of the chambers), gas heated, installed and running situation.