Dilmenler Brand Stenter, 3.40 mt working width, 3.60 mt roller width, 2016 model, 10 chamber, horizontal chain, pin, at the entrance; fabric opener, J- Box, Padder, Erhardt Leimer weft straightener, at the exit; plaiter, gas heated, installed and running situation.

Effe Pasha Stenter, 2.40 mt working width, 2.60 mt roller width, 2017 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, Effe brand middle guider, DOUBLE PADDER, Effe brand 3 roll pre dryer on top, Mahlo RVMC-15 Weft Straightener, edge starching, long entry, at the exit; plaiter, PLC, inverter, Maxon burners, gas heated, installed and running situation.

Elitex Brand Stenter Machine, 2.40 mt width, 1995 model, 7 chambers, Oil heated, Mahlo, Padder, installed and in running condition.

Elteksmak Brand Stenter, 2.20 mt working width, 2.40 mt roll width, 2011 model, 7 chambers, horizontal chain, pin, at the entry; Erhart Leimer fabric opener, chemical treatment rolls, padder, Erhart Leimer weft straightener, steming unit, at the exit; plaiter, batcher, Siemens PLC, Fuji inverter, Dungs burners, gas operated, installed and running situation.

Elteksmak Brand Stenter, 2.20 mt working width, 2.40 mt roll width, 2013 model, 3 chambers, horizontal chain, at the entry; Elteksmak weft straightener, at the exit; plaiter, Siemens PLC, Fuji inverter, STEAM and GAS HEATED, installed and running situation.

Has Group Brand Stenter Machine, 2.40 mt working width, 2.60 mt cylinder width, 2017 model, 8 chambers, horizontal chain, needle, at the entrance; fabric opener, scarf, Erhardt Leimer weft trimmer, at the exit; shaking, PLC, Schneider inverter, natural gas, installed and running situation.

Krantz Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2003 model, 6 chambers, vertical chain, needle, inlet; fabric opener, foulard, Setex Weft trimmer, dampening unit, at the exit; edge cutting, shaking, Delta inverter, Delta PLC, Maxon burner, natural gas, installed and running situation.

Krantz Brand Stenter Machine, 3.40 mt working width, 3.60 mt roller width, 2003 model, 8 chambers, horizontal chain, pin, Erhart Leimer fabric opener (2013 model), padder (padder rolls are rerubberised in 2023), Mahlo weft straightener both at the entrance and at the exit (2013 model), chain is replaced with brand new one at the end of 2018, video system at the entry and at the exit, humidity control device, ELECTRIC PANEL COMPLETELY RENEWED WITH BRAND NEW IN 2021, Siemens PLC, Siemens inverter, fan motors are controlled by inverter, plaiter and batcher at the exit, Maxon burners, gas heated, installed and running situation.

Mikwang Megatex III Stenter Machine, 1.80 mt working width, 2013 model, 8 chamber, horizontal chain, pin, at the entrance; middle guider, padder with three rolls, Mahlo RVMC-12 weft straightener (1.80 mt roll width, 2014 model), at the exit; 2 pcs cooling roll, batcher, plaiter, LS PLC, Mitsubishi Siemens inverter, Pilot Kato burners (4 pcs located on the left, 4 pcs located on the right side of the stenter), gas heated, installed and running situation.

Monforts Montex Brand Stenter, 2 mt working width, 1988 model, 8 chamber, horizontal chain, pins, Mahlo weft straightener, dock rolling, plaiter, electrically reconditioned in 2012, PLC, invertor gas heated, installed and running situation.

Monforts Montex Matex 5000 Stenter, 2.40 mt working width, 2.60 mt roller width, 1998 model, 7 chamber, horizontal chain, PIN and CLIP, at the entrance; fabric opener, padder, Mahlo Weft Straightener, at the exit; edge trimming unit, batcher, plaiter, inverters, Maxon burners (4 burners are located at the left and 3 burners are located at the right side of the chambers), gas heated, installed and running situation.

Shaoyang Brand Stenter, 1.80 mt working width, 2013 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, padder, Fly-Over weft straightener, at the exit; cooling cylinder, batcher and plaiter, Siemens PLC, Danfoss inverter, Maxon burners, gas heated, installed and running situation.

Sun Super (ILSUNG) Stenter, 1.60 mt working width, 1.8 mt roll width, 2002 model, 6 chamber, horizontal chain, pin, at the entrance; fabric opener, padder, vacuum system for wetness suction (provides higher speed in drying and efficiency in finishing), Fine FWS- 920 weft straightener, at the exit; 2 pcs cooling cylinder, batcher, plaiter, inverter, 12 burners located on both side, gas heated, installed and running situation.

Sun Super (ILSUNG) Stenter, 1.80 mt working width, 1.90 mt roll width, 2003 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, padder, Fine weft straightener, at the exit; cooling cylinders, batcher, plaiter, inverter, LG PLC, LG-Fuji inverters, 16 MAXON burners located on both side, gas heated, installed and running situation.

Sun Super (ILSUNG) Stenter, 3.40 mt mt working width, 3.60 mt roll width, 2005 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, padder, Fine weft straightener, at the exit; middle cutter, edge cutter, static electric discharge, cooling cylinders, batcher, plaiter, LG PLC, Siemens- LG inverters, 16 burners located on both side, gas heated, installed and running situation.

Sun Super (ILSUNG) Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2005 model, 8 chambers, horizontal chain, needle, inlet; fabric opener, DOUBLE SCARF, Fine FWS-16R Weft trimmer, at exit; 2 cooling cylinders, dock wrapping, shaking, Siemens-LS inverter, PLC, 16 burners (double sided), BURNERS REPLACED WITH ZERO BURNER IN 2022, natural gas, installed and running (preheating system at the inlet and edge trimming unit at the outlet will not be supplied) ).

TTM RAM-X Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2011 model, 7 chambers, horizontal chain, needle, inlet; J-box, fabric opener, DOUBLE SCARF, Mahlo RVMC-12 Weft editing, edge starching, at exit; dock wrapping, shaking, Schneider PLC, Schneider inverter, Pleva, Maxon burner, natural gas, installed and running situation.

TTM RAM-X Stenter, 2.40 mt working width, 2.60 mt roller width, 2007 model, 8 chamber, horizontal chain, pin, at the entrance; Fabric opener, Erhardt Leimer middle guider and feeder, Padder, Mahlo Weft Straightener, long entry, at the exit; batcher, plaiter, Siemens PLC, Siemens inverter, Maxon burners, gas heated, installed and running situation.