Showing all 13 results

Barmag EFK Textured Yarn Machine

Number: 1
Model: 2011
Kodu: Mr-04102

Barmag EFK Textured Spinning Machine, 240 spindles, 2011 Model, (V) Type, lycra shaft, installed and running condition.

Gusken and Gunne Dobby Velvet Weaving Machines

Number:
Model: 1993
Kodu: Mr-04315

1 pcs Gusken GMV 90 Dobby Velvet Weaving Machine, 1993 model, 1 pcs Gunne PZ Dobby Velvet Weaving Machine, 1989 model, 1.60 mt width, Staubli Dobby, 3 warping beam per machine (2 for bottom, 1 for pile), 12-14 mm current pile height (it can be increased), frames on the machines will be delivered, can make high pile production, suitable for both carpet and velvet production, 1 pcs Heinz Hergert (German) Shearing Machine with hot roll feature (1989 model), 1 pcs Comet Brushing Machine (1989 model), machines are installed and running situation.

ICBT DT 360 Yarn Twisting Machine

Number: 8
Model: 1996
Kodu: Mr-04206

8 pcs ICBT DT 360 Yarn Twisting Machine, 1996 model, 2 pcs machine has both twisting and doubling feature, 120 spindles, installed and running situation.

Konex Brand Plastic Injection Molding Machine

Number: 1
Model: 2021
Kodu: Mr-04217

Konex Brand Plastic Injection Molding Machine, 2021 model, used for trial purposes only, installed and running condition.

Kore malı Sıfır Sanfor keçeleri

Number: 17
Model: SIFIR - NEW
Kodu: Mr-04205

17 adet Kore malı Sıfır Açık En Sanfor ve Tüp Sanfor Makinaları İçin Keçe, Keçe kalınlığı  20 mm,  Ferraro, Sertex, Lafer, Speretto, Mersan, Serteks , Heliot, Albrecht, Ruckh, Monforst, Bruckner, Dilmenler, Weiss, Has marka makinalar için uygundur.

Fabric Pleating Machine

Number: 1
Model: 2005
Kodu: Mr-04210

Fabric Pleating Machine, 3.60 mt width, wire system 2005 model, a process performed by putting fabric between 2 papers, polyester fabrics are pleated by means of heated wires, narrowing the fabric by 50-60 cm, and becoming a spring fabric. The desired fabric width can be made from 50 cm to 3.60 m in width, 2 bands or 3 can be used, it can produce approximately 700 to 1000 mt of products per day, it is made in Italy, it is installed and in working condition.

MCS Brand SF-100 Softflow HT Fabric Dyeing Machine

Number: 1
Model: 2003
Kodu: Mr-04208

MCS Brand SF-100 Softflow HT Fabric Dyeing Machine, 450 kg capacity, 3 chambers, 2003 model, Telemecanica programmer, water reservoir tank, installed and running situation.

MCS Brand SF-100 Softflow HT Fabric Dyeing Machine

Number: 1
Model: 2003
Kodu: Mr-04209

MCS Brand SF-100 Softflow HT Fabric Dyeing Machine, 300 kg capacity, 2 chambers, 2003 model, Telemecanica programmer, water reservoir tank, installed and running situation.

Nomex brand ZERO Felt

Number: 1
Model: SIFIR - NEW
Kodu: Mr-04104

Nomex brand ZERO Felt, for transfer printing machines or decaturing machines, 1.95 meters wide, 4.25 meters long, 8 mm thick.

Santex Santashrink Chain Dryer

Number: 1
Model: 2000
Kodu: Mr-04101

Santex Santashrink Drying Machine, 2.40 mt working width, 5 chamber, 2000 model, padder, chain, single pass, software is renewed with Schneider brand equipments, gas heated, installed and running situation.

Schlafhorst ACO10 / 480 Rotor Open End İplik Makinaı

Number: 2
Model: SIFIR - NEW
Kodu: Mr-04312

2 pcs BRAND NEW Saurer Schlafhorst Autocoro 10 Open End Spinning Machines,

 

Therma Brand Steam Boiler

Number: 1
Model: 2001
Kodu: Mr-04094

Therma Brand Steam Boiler, 2001 Model, 150 m2, installed and running situation.

Chinease Made Transfer Printing Machine

Number: 1
Model: 2017
Kodu: Mr-04314

Chinease Made Transfer Printing Machine, 1.80 mt working width, 40 cm cylinder diameter, new Felt, 2mt table length, installed and running situation.