Stenter Machines

TTM RAM-X Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2011 model, 7 chambers, horizontal chain, needle, inlet; J-box, fabric opener, DOUBLE SCARF, Mahlo RVMC-12 Weft editing, edge starching, at exit; dock wrapping, shaking, Schneider PLC, Schneider inverter, Pleva, Maxon burner, natural gas, installed and running situation.

TTM RAM-X Stenter, 2.40 mt working width, 2.60 mt roller width, 2007 model, 8 chamber, horizontal chain, pin, at the entrance; Fabric opener, Erhardt Leimer middle guider and feeder, Padder, Mahlo Weft Straightener, long entry, at the exit; batcher, plaiter, Siemens PLC, Siemens inverter, Maxon burners, gas heated, installed and running situation.

Sun Super (ILSUNG) Stenter, 3.40 mt mt working width, 3.60 mt roll width, 2005 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, padder, Fine weft straightener, at the exit; middle cutter, edge cutter, static electric discharge, cooling cylinders, batcher, plaiter, LG PLC, Siemens- LG inverters, 16 burners located on both side, gas heated, installed and running situation.

Sun Super (ILSUNG) Brand Stenter, 2.40 mt working width, 2.60 mt cylinder width, 2005 model, 8 chambers, horizontal chain, needle, inlet; fabric opener, DOUBLE SCARF, Fine FWS-16R Weft trimmer, at exit; 2 cooling cylinders, dock wrapping, shaking, Siemens-LS inverter, PLC, 16 burners (double sided), BURNERS REPLACED WITH ZERO BURNER IN 2022, natural gas, installed and running (preheating system at the inlet and edge trimming unit at the outlet will not be supplied) ).

Sun Super (ILSUNG) Stenter, 2 mt mt working width, 2.20 mt roll width, 1997 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, DOUBLE PADDER (second padder is used for dyeing), Fine weft straightener, at the exit; 2 pcs cooling cylinder, batcher, plaiter, Teco inverters, automatization software installed, digital heat control, totally 8 MAXON burners located on both side of the chambers (4 at the left, 4 at the right), gas heated, installed and running situation.

Shaoyang Brand Stenter, 1.80 mt working width, 2013 model, 8 chamber, horizontal chain, pin, at the entrance; fabric opener, padder, Fly-Over weft straightener, at the exit; cooling cylinder, batcher and plaiter, Siemens PLC, Danfoss inverter, Maxon burners, gas heated, installed and running situation.

Monforts Montex Matex 5000 Stenter, 2.40 mt working width, 2.60 mt roller width, 1998 model, 7 chamber, horizontal chain, PIN and CLIP, at the entrance; fabric opener, padder, Mahlo Weft Straightener, at the exit; edge trimming unit, batcher, plaiter, inverters, Maxon burners (4 burners are located at the left and 3 burners are located at the right side of the chambers), gas heated, installed and running situation.

Monforts Montex Brand Stenter, 2 mt working width, 1988 model, 8 chamber, horizontal chain, pins, Mahlo weft straightener, dock rolling, plaiter, electrically reconditioned in 2012, PLC, invertor gas heated, installed and running situation.

Mikwang Megatex III Stenter (Korean made), 1.80 mt working width, 2 mt roller width, 2013 model, 8 chamber, horizontal chain, pin, at the entrance; middle guider, padder with three rolls, Mahlo RVMC-12 weft straightener (1.80 mt roll width, 2014 model), at the exit; 2 pcs cooling roll, batcher, plaiter, LS PLC, Mitsubishi Siemens inverter, Pilot- Kato (Japanese) burners (4 pcs located on the left, 4 pcs located on the right side of the stenter), gas heated, installed and running situation.